MOUNTAIN VIEW, Calif. / Jan 08, 2024 / Business Wire / Aeva® (NYSE: AEVA), a leader in next-generation sensing and perception systems, today introduced Aeva Atlas™, the first 4D LiDAR sensor designed for mass production automotive applications. Intended to accelerate the industry’s path to safer advanced driver assistance systems (ADAS) and autonomous driving, and built to meet automotive-grade requirements, Atlas is powered by Aeva’s innovations in custom silicon technology including the Aeva CoreVision™, next-generation Lidar-on-Chip module, and Aeva X1™, a powerful new System-on-Chip (SoC) LiDAR processor.
“We are thrilled to introduce Atlas as the industry’s first automotive-grade 4D LiDAR sensor for mass production in automotive applications,” said Mina Rezk, Co-Founder and CTO at Aeva. “Atlas is the key development that will enable OEMs to equip their vehicles with advanced safety and automated driving features at highway speeds by addressing challenging use cases that could not be solved before. Importantly, we believe it will accelerate the industry’s transition to FMCW LiDAR technology, which we believe is increasingly considered to be the end state for LiDAR, offering greatly enhanced perception solutions that leverage its unique instant velocity data.”
Powered by New Aeva Silicon Innovations
Compact and Power Efficient
Together, Aeva’s new silicon innovations allow Atlas to be over 70% smaller and consume four times (4x) less power than Aeva’s previous generation LiDAR sensor, enabling operation without active cooling and allowing for seamless integrations in-cabin behind the windshield, on the vehicle’s roofline or in the grille.
Industry-leading FMCW Performance
Using Aeva’s unique Frequency Modulated Continuous Wave (FMCW) 4D LiDAR technology, automated vehicles can unlock new levels of safety and vehicle automation by detecting objects faster, farther away, and with higher confidence – instantaneously discriminating between static and dynamic points and knowing the precise velocity of dynamic objects. Atlas delivers critical requirements for highway-speed driving with a 25% greater detection range for low-reflectivity targets and a maximum detection range of up to 500 meters. Importantly, Atlas sensors are immune to interference from direct sunlight, signals from other LiDAR sensors, and from retroreflective objects like street signs, enabling clear perception across a wide variety of everyday driving scenarios.
Advanced Perception Capabilities
Atlas is accompanied by Aeva’s perception software which harnesses advanced machine learning-based classification, detection and tracking algorithms. Incorporating the additional dimension of velocity data, Aeva’s perception software provides unique advantages over conventional time of flight 3D LiDAR sensors including:
Aeva expects to release Atlas for production consumer and commercial vehicles starting in 2025, with samples available to select automotive OEMs and mobility customers earlier. To learn more about Atlas visit: www.aeva.com/atlas.
Aeva at CES® 2024
Aeva’s next-generation sensing and perception systems built on FMCW technology offer a wide variety of solutions for vehicle safety and automation. Visit the Aeva booth to see Atlas and experience Aeva’s family of sensing and perception products at LVCC West Hall #6841.
About Aeva Technologies, Inc. (NYSE: AEVA)
Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. For more information, visit www.aeva.com, or connect with us on X or LinkedIn.
Aeva, the Aeva logo, Aeva 4D LiDAR, Aeva Atlas, Aeries, Aeva Ultra Resolution, Aeva CoreVision, and Aeva X1 are trademarks/registered trademarks of Aeva, Inc. All rights reserved. Third-party trademarks are the property of their respective owners.
Forward looking statements
This press release contains certain forward-looking statements within the meaning of the federal securities laws. These forward-looking statements generally are identified by the words “believe,” “project,” “expect,” “anticipate,” “estimate,” “intend,” “strategy,” “future,” “opportunity,” “plan,” “may,” “should,” “will,” “would,” “will be,” “will continue,” “will likely result,” and similar expressions. Forward-looking statements are predictions, projections and other statements about future events that are based on current expectations and assumptions and, as a result, are subject to risks and uncertainties. Forward-looking statements in this press release include, but are not limited to expectations about our product features, performance, customers, manufacturability, scalability and cost. Many factors could cause actual future events to differ materially from the forward-looking statements in this press release, including, but not limited to: (i) the fact that Aeva is an early stage company with a history of operating losses and may never achieve profitability, (ii) Aeva’s limited operating history, (iii) the ability to implement business plans, forecasts, and other expectations and to identify and realize additional opportunities, (iv) the ability for Aeva to have its products selected for inclusion in OEM products, (v) the ability to manufacture at volumes and costs needed for commercial programs and (vi) other material risks and other important factors that could affect our financial results. Please refer to our filings with the SEC, including our most recent Form 10-Q and Form 10-K. These filings identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements. Forward-looking statements speak only as of the date they are made. Readers are cautioned not to put undue reliance on forward-looking statements, and Aeva assumes no obligation and does not intend to update or revise these forward-looking statements, whether as a result of new information, future events, or otherwise. Aeva does not give any assurance that it will achieve its expectations.
Last Trade: | US$4.86 |
Daily Change: | 0.11 2.32 |
Daily Volume: | 261,060 |
Market Cap: | US$261.860M |
November 06, 2024 October 08, 2024 August 07, 2024 |
DevvStream provides upfront capital for sustainability projects in exchange for carbon credit rights. Through these rights, the company generates and manages carbon credits by utilizing the most technologically advanced...
CLICK TO LEARN MORENorthstar Clean Technologies is a cleantech company focused on the sustainable recovery and reprocessing of asphalt shingles. Northstar’s mission is to be the leader in the recovery and reprocessing of asphalt shingles in North America...
CLICK TO LEARN MORECOPYRIGHT ©2022 GREEN STOCK NEWS