Electra Battery Materials Corporation (NASDAQ: ELBM) (TSXV: ELBM) ("Electra" or the "Company") today provided an update on its 2022 exploration program at its Ruby prospect, located 1.5 kilometers from its primary Iron Creek cobalt-copper deposit in the Idaho Cobalt Belt.  Electra's exploration program is a cornerstone of its strategy to onshore the electric vehicle supply chain by identifying domestic sources of critical minerals for the electric vehicle market. 

• A strong and open-ended anomaly at Ruby was defined by an Induced Polarization (IP) survey, which measures the chargeability of the subsurface to determine the presence of sulphide minerals.
• Drilling on the eastern margin of the Ruby target area intersected mineralization that is texturally similar to the Iron Creek deposit. Additional drilling is planned to the west, targeting the strongest part of the identified anomaly.
• Surface sampling, geophysical surveys and drilling completed to date suggest that Ruby could be an important new mineralized cobalt and copper target in proximity to Electra's Iron Creek deposit.
• Drill samples have been sent for testing at a third-party laboratory, with assay results expected before the end of Q3 2022.

"It is a testament to the Electra team that our maiden drill campaign at Ruby intersected mineralization exactly where the geophysical survey predicted it would be," said Trent Mell CEO of Electra Battery Materials.  "These are early days for this target, but the similarities to our Iron Creek cobalt and copper deposit validate our view that the underexplored Idaho Cobalt Belt remains prospective for new discoveries. Idaho could play an important role in the onshoring of the EV battery supply chain by providing a domestic supply of cobalt in America."

The 2022 drill program was based on the results of a 7.6-kilometer pole-dipole 3D IP survey of the Ruby prospect. The survey defined a strong chargeability anomaly with a 10 mV/V contour open-ended on each side (see Figure 1). Stronger chargeability zones exceeding 30 mV/V occur on the western edge of the survey and remain open-ended, extending toward the Coiner Fault system. The chargeability anomaly is spatially coincident with cobalt mineralization sampled at surface, and 3D modeling indicates it increases in thickness with depth.

Two drill holes have been completed for a total of 824 metres on the eastern side of the target. Both holes intercepted strong zones of pyrite mineralization spatially coincident with the upper edge of the target zone. Additional drilling will move west and target the strongest portion of the anomaly.

Electra previously sampled surface exposure of cobalt mineralization at Ruby across a 295-metre strike extent, returning several high-grade values, such as 10.7 metres at 0.24% cobalt (including 1.5 metre at 0.48% cobalt) and 7.6 metres at 0.26% cobalt (see October 29, 2019 press release).

Based on bedrock mapping, Ruby may be a separate stratigraphic unit or may be structurally offset from the Iron Creek mineralized horizon by a north-south trending fault. Younger volcanic rocks partially cover the target stratigraphy between Iron Creek and Ruby.

Along with covering Ruby, a single 1.5 km line of pole-dipole IP was completed on the Redcastle property approximately 1.2 km southeast of Ruby. The Redcastle project covers similar stratigraphy to Ruby and Iron Creek occurrences and is being explored for additional zones of sulfide mineralization. The single IP line did not identify any significant chargeability anomalies, however, additional exploration is planned on the Redcastle property. In 2021, Electra entered a joint venture on the 224 hectares Redcastle property with Phoenix Copper Ltd. (see May 25, 2021 press release for terms of JV).

Electra's Iron Creek Project is located in the Idaho Cobalt Belt and is one of the few primary cobalt deposits in the world. The Company completed 30,000 metres of drilling from 2017 to 2019 before pausing exploration to focus on developing its battery materials park in Canada, which will be commissioned in phases starting in Q4 2022.

Iron Creek is considered to be amenable to underground mining extraction, which would result in a small footprint and minimize environmental impact. Drilling has demonstrated multiple mineralized horizons continuous along strike and down-dip. Thicker zones of mineralization of up to 30 metres occur in the eastern portions of the resource that also contain higher grades of cobalt.

Iron Creek currently has an Indicated Resource of 2.2 million tonnes at 0.32% cobalt equivalent (0.26% cobalt and 0.61% copper) for 12.3 million pounds of contained cobalt and 29 million pounds of contained copper, as well as an Inferred Resource of 2.7 million tonnes at 0.28% cobalt equivalent (0.22% cobalt and 0.68% copper) for an additional 12.7 million pounds of contained cobalt and 40 million pounds of contained copper. The resource estimate used a 0.18% cobalt equivalent cutoff grade.

Dan Pace is a Registered Member of the Society for Mining, Metallurgy & Exploration and is the Qualified Person as defined by National Instrument 43-101 who has reviewed and approved the contents of this news release.  Mr. Pace is employed on a full-time basis as Principal Geologist for Electra.

Electra is a processor of low-carbon, ethically-sourced battery materials. Currently commissioning North America's only cobalt sulfate refinery, Electra is executing a multipronged strategy focused on onshoring the electric vehicle supply chain.  Keys to its strategy are integrating black mass recycling and nickel sulfate production at Electra's refinery located north of Toronto, advancing Iron Creek, its cobalt-copper exploration-stage project in the Idaho Cobalt Belt, and expanding cobalt sulfate processing into Bécancour, Quebec.  For more information visit www.electrabmc.com.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Readers are cautioned that mineral resources are not economic mineral reserves and that the economic viability of resources that are not mineral reserves has not been demonstrated. The estimate of mineral resources may be materially affected by geology, environmental, permitting, legal, title, socio-political, marketing or other relevant issues. The mineral resource estimate is classified in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum's (CIM) "2014 CIM Definition Standards on Mineral Resources and Mineral Reserves" incorporated by reference into NI 43-101. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies or economic studies except for a Preliminary Economic Assessment as defined under NI 43-101. Readers are cautioned not to assume that further work on the stated resources will lead to mineral reserves that can be mined economically. An Inferred Mineral Resource as defined by the CIM Standing Committee is "that part of a Mineral Resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality continuity. An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration. United States investors are cautioned that CIM and NI 43-101 standards for resource classification and public disclosure differ from the requirements of the U.S. Securities and Exchange Commission (SEC) and resource information contained in this news release may not be comparable to similar information disclosed by domestic United States companies subject to the SEC's reporting and disclosure requirements.

This news release may contain forward-looking statements and forward-looking information (together, "forward-looking statements") within the meaning of applicable securities laws and the United States Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical facts, are forward-looking statements. Generally, forward-looking statements can be identified by the use of terminology such as "plans", "expects', "estimates", "intends", "anticipates", "believes" or variations of such words, or statements that certain actions, events or results "may", "could", "would", "might", "occur" or "be achieved". Forward-looking statements involve risks, uncertainties and other factors that could cause actual results, performance, and opportunities to differ materially from those implied by such forward-looking statements. Factors that could cause actual results to differ materially from these forward-looking statements are set forth in the management discussion and analysis and other disclosures of risk factors for Electra, filed on SEDAR at www.sedar.com. Although Electra believes that the information and assumptions used in preparing the forward-looking statements are reasonable, undue reliance should not be placed on these statements, which only apply as of the date of this news release, and no assurance can be given that such events will occur in the disclosed times frames or at all. Except where required by applicable law, Electra disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.