Removes Key Adoption Barriers in Pediatric/Adolescent Oncology and Deformity Market ROCK HILL, S.C., Dec. 15, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) today announced that the U.S. Food and Drug Administration has granted 510(k) clearance expanding the indications for its VSP ® Orthopedics virtual surgical planning and patient-specific instrumentation platform to include skeletally mature adolescents of normal bone... Read More

ROCK HILL, S.C., Dec. 09, 2025 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE: DDD) today announced that it has entered into separate, privately negotiated agreements with a limited number of holders (the “Transaction Participants”) of its existing 0% Convertible Senior Notes due 2026 (the “2026 Notes”) to exchange an aggregate principal amount of $30,773,000 of 2026 Notes for an aggregate of 16,625,243 shares (“Shares”)... Read More

SLA 825 Dual, the Company’s most advanced large-frame Stereolithography printer, delivers next-level productivity and 20% larger build volume for key markets such as Motorsports, Foundries & Service Bureaus ArrayCast™ allows foundries to create customized casting trees 10x more efficiently with 20x reduction in manual labor... Read More

ROCK HILL, S.C., Nov. 04, 2025 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the third quarter ended September 30, 2025. Revenue of $91.2 million driven by sequential growth in hardware printer sales and continued strong growth year-over-year in Medical Technology. Regenerative Medicine revenue declined sequentially, primarily due to the achievement of a program milestone in... Read More

ROCK HILL, S.C., Oct. 30, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the third quarter of 2025, ended September 30, 2025 after market close on Tuesday, November 4, 2025. The company will hold a conference call and webcast to discuss these financial results on Wednesday, November 5, 2025 at 8:30 a.m. Eastern Time. Third Quarter 2025 Financial Results Conference... Read More

NAMI, the 3D Systems–Dussur joint venture, reached critical milestones in deploying advanced 3D printing across Saudi Arabia’s energy and defense sectors Saudi Electric Company, the Middle East’s largest electricity producer, signed an agreement to make a strategic investment in NAMI, acquiring 30% stake in expanded joint venture Lockheed Martin entered into collaboration with NAMI to qualify and manufacture critical... Read More

New Surface Enhance™ feature improves surface finishes to reduce polishing time and gold loss New MultiJet Printing solution delivers over 30% improvements in speed with 50% less support material usage to reduce costs Post-processing time reduced by up to 60% with break-away supports, accelerating time to final jewelry item... Read More

Primary focus on leveraging breakthroughs in AI to improve part quality, speed the design process for additive manufacturing, optimize manufacturing workflows and enhance ease-of-use in factory operating environments. Company to expand capabilities of 3D Sprint ® for polymer production systems by leveraging AI and machine learning models, informed by data from industry’s largest installed base of production printers. Hubb... Read More

Two-year contract award for Large-format Metal 3D Printer Advanced Technology Demonstrator Supports development of large-scale industrial metal AM print capabilities for high-speed flight applications Award is an extension of an existing program to demonstrate key technologies needed for 3D printing large, high-temperature metal structures associated with high-speed flight operating environments ROCK HILL, S.C., Aug. 26,... Read More

3D Systems’ Executive Vice President, Phyllis Nordstrom to Serve as Interim Chief Financial Officer ROCK HILL, S.C., Aug. 20, 2025 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) announced that Jeffrey D. Creech is stepping down as the company’s Chief Financial Officer, effective August 29, 2025, to accept a new career opportunity. Phyllis Nordstrom, 3D Systems’ Executive Vice President, Chief Administrative Officer, has... Read More

ROCK HILL, S.C., Aug. 11, 2025 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2025. Revenue of $95 million led by double-digit growth in Medical Technology and Aerospace & Defense markets Regenerative Medicine partnership with United Therapeutics targeted on manufacture of human lungs reached a new printing milestone resulting in a $2 million... Read More

ROCK HILL, S.C., Aug. 04, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the second quarter 2025 after the U.S. stock markets close on Monday, August 11, 2025. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, August 12, 2025 at 8:30 a.m. Eastern Time. Second Quarter 2025 Financial Results Conference Call... Read More

Company’s technology redefines dental prosthetics with revolutionary single-piece, multi-material dentures delivering distinctive combination of exquisite aesthetics, comfort and outstanding resistance to breakage for enhanced patient experience NextDent ® Jetted Denture Solution validated with strong endorsements from beta customers highlighting effortless usability, unmatched material properties and ground-breaking... Read More

Collaboration with French MedTech company, TISSIUM, has resulted in FDA approval for unique 3D-printed polymeric solution for repair of peripheral nerve damage 3D Systems’ bioprinting system enabled production of a 3D-printed bioabsorbable medical device leveraging TISSIUM’s proprietary biomorphic programable polymers—a major industry milestone that sets new standard for high resolution elastomeric 3D-printed medical... Read More

Transactions permanently retire approximately $88 million of debt, 41% of prior balance, at a meaningful discount to par Refinancing extends maturity with issuance of $92 million Convertible Senior Secured Notes due 2030 Repurchase of 8 million shares, representing approximately 6% of the Company’s outstanding common stock, in connection with the transaction reduces dilution for equity holders Strong remaining cash reserves... Read More

ROCK HILL, S.C., June 18, 2025 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) announced that it has entered into separate, privately negotiated subscription agreements with a limited number of qualified institutional buyers, pursuant to which 3D Systems will issue $92 million aggregate principal amount of its 5.875% convertible senior secured notes due 2030 (the “notes”). The issuance and sale of the notes are expected to... Read More

3D Systems’ applications expertise, technologies foundational to research projects led by Penn State, Arizona State & NASA Glenn Research Center Additive manufacturing enabling novel titanium and nitinol passive heat pipes for space applications with 50% reduced weight enabling more efficient thermal management Researchers advance state-of-the-art for thermal management of CubeSats with projected 6× greater... Read More

3D Systems’ NextDent branded dental materials have set the benchmark for quality and aesthetics, addressing the broadest set of patient-specific dental solutions in the world NextDent materials form the foundation for 3D Systems’ dental ‘repair’ offerings with regulatory approvals across the US, Europe and Asia Industry’s largest portfolio of dental 3D printing materials seamlessly integrates with leading dental 3D printers... Read More

ROCK HILL, S.C., April 30, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the first quarter 2025 after the U.S. stock markets close on Monday, May 12, 2025. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, May 13, 2025 at 8:30 a.m. Eastern Time. First Quarter 2025 Financial Results Conference Call Date:... Read More

First 3D-printed PEEK facial implant manufactured at the point-of-care using 3D Systems’ EXT 220 MED Point-of-care collaboration between surgeons, engineers, and technology enables tailored solutions to address complex patient needs 3D Systems’ solutions accelerating additive manufacturing use in maxillofacial reconstruction — total market anticipated to reach more than $4 billion by end of 2034 ROCK HILL, S.C., April 08,... Read More

Reduce cost of high mix, low volume manufacturing by multiple orders of magnitude with high-throughput, precision Figure ® 4 135 solution Achieve up to 60% improved process efficiency for applications such as jigs and fixtures, tooling, & patterns using a new module for large-format EXT Titan Pellet Extrusion printers Deliver... Read More

Closed transaction for $123 million, with expected net proceeds of approximately $100 million to strengthen balance sheet and invest in future growth and profitability initiatives Sharpens focus on core additive manufacturing software solutions — 3D Sprint ® , 3DXpert ® and Oqton Industrial Manufacturing OS —to advance production applications and accelerate customer adoption ROCK HILL, S.C., April 01, 2025 (GLOBE NEWSWIRE)... Read More

ROCK HILL, S.C., March 26, 2025 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the fourth quarter and full year ended December 31, 2024. Full-year 2024 revenue of $440 million, above lower end of guidance range, inclusive of a $9 million revenue reduction in Q4 driven by a change in accounting estimates for Regenerative Medicine program milestone recognition. This change in... Read More

ROCK HILL, S.C., March 21, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the fourth quarter and full year 2024 and provide 2025 guidance after the U.S. stock markets close on Wednesday, March 26, 2025. The company will hold a conference call and simultaneous webcast to discuss these financial results and outlook on Thursday, March 27, 2025 at 8:30 a.m. Eastern Time.... Read More

ROCK HILL, S.C., March 04, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today that the Company will participate in the Cantor Global Technology Conference on March 11, 2025. President and CEO, Dr. Jeffrey Graves will participate in a fireside chat at 2:20 p.m. Eastern Standard Time and will participate in individual meetings alongside members of the Company’s leadership team throughout the day. A live webcast of... Read More

Company to showcase market-leading solutions portfolio at LMT Lab Day 2025 Will preview NextDent ® 300 MultiJet 3D printer designed to rapidly produce multi-material, monolithic dentures Plans include solutions for nightguards and direct-printed aligners in near future, bolstering portfolio to address straightening,... Read More

ROCK HILL, S.C., Feb. 17, 2025 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) announced Charles (Chuck) Hull, its co-founder and chief technology officer for regenerative medicine, has been elected to the National Academy of Engineering (NAE). Election to the NAE is among the highest professional distinctions accorded to an engineer. Academy membership honors those who have made outstanding contributions in at least one... Read More

HOUSTON, Feb. 05, 2025 (GLOBE NEWSWIRE) -- Systemic Bio ™ , a 3D Systems company (NYSE: DDD), has been named the winner of the prestigious SLAS 2025 Innovation Award. This award recognizes groundbreaking technological advancements poised to drive innovation in laboratory science and automation. The competition featured cutting-edge developments led by distinguished experts from top institutions worldwide. The award... Read More

Collaboration between Daimler Truck | Daimler Buses, 3D Systems, Oqton, and Wibu-Systems yields unique remote spare part production solution, protecting Daimler Buses’ intellectual property through digital rights management, expanding manufacturing footprint Solution enables Daimler Buses-certified 3D printing partners to produce parts on-demand to overcome supply chain bottlenecks, reduce delivery time by up to 75% 3D... Read More

HOUSTON, Jan. 13, 2025 (GLOBE NEWSWIRE) -- Systemic Bio ™ , a 3D Systems company (NYSE: DDD), is honored to announce its selection as a Top 10 Finalist for the prestigious SLAS 2025 Innovation Award. This recognition underscores the groundbreaking potential of Systemic Bio’s proprietary h-VIOS™ platform geared at accelerating drug discovery and development using human-relevant data from bioprinted tissues. The SLAS... Read More

ROCK HILL, S.C., Jan. 06, 2025 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today that management will participate in the 27 th Annual Needham Growth Conference on January 14, 2025. President and CEO, Dr. Jeffrey Graves will participate in a fireside chat at 11:45 a.m. Eastern Standard Time and will participate in individual meetings alongside members of the company’s leadership team throughout the day. A live webcast... Read More

3D Systems to sell Geomagic ® reverse engineering, design, and inspection software portfolio to Hexagon for $123 million, with closure anticipated in first half of 2025 Company will sharpen its focus on software solutions that accelerate adoption of 3D printing technologies in large-scale, production application environments Focus to be on expansion of capabilities of market-leading platforms, 3D Sprint ® and 3DXpert ® for... Read More

ROCK HILL, S.C., Nov. 26, 2024 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the third quarter ended September 30, 2024. Third Quarter Highlights (All numbers are unaudited and are presented in millions, except per share amounts or as otherwise noted) Revenue of $112.9 million decreased 9% year-over-year primarily driven by macro weakness in printer sales, partially offset by... Read More

ROCK HILL, S.C., Nov. 21, 2024 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (“the Company”) today announced the Company will release its financial results for third quarter 2024 after the U.S. stock markets close on Tuesday, November 26, 2024. The Company will hold a conference call and simultaneous webcast to discuss these financial results on Wednesday, November 27, 2024 at 8:30 a.m. Eastern Time. Third Quarter 2024 Financial... Read More

Motorsports team adding 3D Systems’ SLA 750 Dual and PSLA 270 technology to workflow to accelerate wind tunnel testing, building on decades-long partnership Broad material portfolio combined with industry’s most advanced 3D printing technologies enables improved part quality, reduces time to part in hand 3D Systems’ solutions driving growth of additive manufacturing use in motorsports — total market for automotive... Read More

Preliminary third quarter 2024 revenue to be approximately $113 million* Q3 materials grew 10% year-over-year and 9% sequentially, offset by declines in printer revenues driven by continued macro-related pressures on capital spending* Record year of product innovation and regulatory approvals supporting future growth in key markets such as Dental, Personalized Healthcare, Aerospace & Defense. This positions the company for... Read More

PSLA 270 solution — new mid-frame projector-based polymer 3D printing platform, Wash 400/Wash 400F and Cure 400 — enables faster production of end-use parts Figure 4 ® Rigid Composite White & Accura ® AMX Rigid Composite White, with early availability in Europe, enables high resolution, high stiffness parts with improved... Read More

Unique multi-material, single-piece dentures offer unparalleled combination of distinctive break resistance and outstanding aesthetics for enhanced patient experience Solution being implemented by Glidewell, one of the world’s largest dental laboratories FDA clearance represents another important milestone in Company’s... Read More

New TOTAL ANKLE Patient-Matched Guides pair with Smith+Nephew’s Total Ankle replacement solution, designed to help surgeons save time and ensure accuracy while performing fewer steps than standard instrumentation FDA clearance expands 3D Systems’ leadership in supporting orthopedic surgeons, with surgical planning experience now exceeding 175,000 cases 3D Systems engineers and manufactures custom, patient-specific orthopedic... Read More

Strategic partner Baker Hughes deploys Oqton Manufacturing OS as its production solution for additive-driven manufacturing workflow in Houston, Texas Enables on-demand additive manufacturing for regulated markets, improves efficiency & enables scalability leveraging power of real-time monitoring Provides full factory-floor... Read More

Advanced software tool maximizes material removal from casting pattern interiors for cleaner burnout, more efficient draining Customers realizing up to 50% reduction in material consumption, multi-hour reduction in build times Step change in material efficiency has demonstrated cost competitiveness with traditional injection... Read More

ROCK HILL, S.C., Aug. 29, 2024 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2024. Second Quarter Financial Results and Recent Business Highlights (All numbers are unaudited and are presented in millions, except per share amounts or as otherwise noted) Q2'24 revenue of $113.3 million increased 10.1% quarter-over-quarter across printers,... Read More

ROCK HILL, S.C., Aug. 20, 2024 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the first quarter ended March 31, 2024. First Quarter Financial Results and Recent Business Highlights (All numbers are unaudited and are presented in millions, except per share amounts or as otherwise noted) Q1'24 revenue of $102.9 million decreased 15.1% year-over-year primarily driven by lower... Read More

Company plans to file its 2023 Annual Report on Form 10-K after market on August 13, 2024 Significant filing delays and added costs were experienced due to extended close activities and related audit procedures in connection with the 2023 audit Final 2023 financial results yielded no change to revenue, and slight improvement in net loss, versus preliminary results filed on February 28, 2024 No restatement of prior years’... Read More

NAMI purchased 3D Systems’ metal DMP Factory 500 and DMP Flex 350 Dual solutions, and polymer SLS 380 solution to produce parts for Saudi Electricity Company — improving supply chain efficiency Demonstrates positive effects of manufacturing locally and impact of making additive manufacturing more accessible to catalyze innovation 3D Systems’ solutions driving growth of additive manufacturing use in energy sector — total... Read More

Collaboration intended to catalyze metal AM applications in high-criticality markets Precision Resource integrating two 3D Systems DMP Flex 350 Dual printers into manufacturing workflow to support efforts DMP Flex 350’s best-in-class environmental control, inert atmosphere ensures exceptionally high-quality parts for precision... Read More

Smaller footprint with lower upfront investment enables broader adoption of industrial EXT platform in existing and new markets Leverages proven high-speed pellet extrusion technology— up to 10x faster and 10x lower costs — cheaper than available filament systems for better ROI Production platform with refined design and open... Read More

Company rapidly expanding market-leading solution portfolio to address all major facets of dentistry, including alignment, protection, repair, and partial/full replacement of teeth Announces largest contract award in company history, with estimated value approaching a quarter billion dollars over five years, to support indirect manufacturing process for clear aligners Commercial launch of direct printing technology for clear... Read More

FDA clearance enables wide-spread adoption of 3D Systems self-contained, cleanroom environment-based printing system, the EXT 220 MED, with medical-grade PEEK materials to deliver patient-specific cranial reconstruction solutions 3D-printed PEEK implants using the EXT 220 MED successfully demonstrated in nearly 40... Read More

ROCK HILL, South Carolina, March 22, 2024 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (“the Company”) today announced that, on March 18, 2024, it received a notice (the “NYSE Notice”) from the New York Stock Exchange (the “NYSE”) that the Company is not in compliance with the NYSE’s continued listing requirements under the timely filing criteria established in Section 802.01E of the NYSE Listed Company Manual, because the... Read More

Addition of single and dual laser printers enables use of broader materials portfolio to address new applications with Titanium, Stainless Steel DMP Flex 350’s best-in-class oxygen level (<25 ppm), inert atmosphere ensures exceptionally strong, accurate parts for precision applications ROCK HILL, S.C., March 12, 2024 (GLOBE... Read More

Repurchasing approximately $110 million of 0% coupon, convertible senior notes at approximately 22% discount to par value Reduces remaining balance of outstanding notes to approximately $214 million, over 50% reduction from initial issued principal balance of $460 million, due 2026 Reinforces balance sheet strength and maintains strong cash position to support operational needs ROCK HILL, S.C., March 05, 2024 (GLOBE... Read More

ROCK HILL, S.C., Feb. 27, 2024 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the fourth quarter and full year ended December 31, 2023. Fourth Quarter Financial Results (Unaudited) (All numbers are unaudited and are presented in thousands, except per share amounts or otherwise noted) Q4 2023 revenue of $114,848 decreased 13.5% compared to Q4 2022 due to significant softness in... Read More

Unique dental materials enable production of superior monolithic dentures, combining beautiful aesthetics with outstanding performance, yielding a market-leading denture solution Distinctive break-resistance ensures long product life, meeting a critical patient requirement New denture product family dramatically expands... Read More

ROCK HILL, S.C., Feb. 14, 2024 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the fourth quarter and full year 2023 after the U.S. stock markets close on Tuesday, February 27, 2024. The company will hold a conference call and simultaneous webcast to discuss these financial results on Wednesday, February 28, 2024 at 8:30 a.m. Eastern Time. Fourth Quarter and Full Year 2023... Read More

HOUSTON, Feb. 08, 2024 (GLOBE NEWSWIRE) -- Systemic Bio™ , a 3D Systems (NYSE:DDD) company, is excited to announce the acceptance of two abstracts for presentation at the prestigious Society of Toxicology (SOT) 2024 Annual Meeting (Salt Lake City, March 10-14, 2024) and American Association for Cancer Research (AACR) 2024 Annual Meeting (San Diego, April 5-10, 2024). At the SOT 2024 meeting, Systemic Bio will present its... Read More

3D Systems DMP Flex 350 Dual delivers speed, flexibility to enable increased options for WeAreAM and Gruppo Grazioli customers Direct metal printing solution part of WeAreAM’s new Center of Excellence ROCK HILL, S.C., Jan. 29, 2024 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced that WeAreAM , a digital and metal... Read More

ROCK HILL, S.C., Jan. 10, 2024 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced changes in the company’s leadership structure. Reji Puthenveetil, who currently serves as EVP, Industrial Solutions, will take on expanded responsibilities as EVP, Additive Solutions and Chief Commercial Officer . In this role, Reji will have responsibility for all of the company’s commercial operations, ranging from Sales and Marketing... Read More

ROCK HILL, S.C., Jan. 08, 2024 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today that management will participate in the 26 th Annual Needham Growth Conference on January 17, 2024. President and CEO, Dr. Jeffrey Graves will participate in a fireside chat at 1:30 p.m. Eastern Standard Time and will participate in individual meetings alongside members of the company’s leadership team throughout the day. A live webcast... Read More

Jeffrey Creech joins as Chief Financial Officer Harriss T. Currie joins as President - Regenerative Medicine New organization structure reflects technical progress and potential for significant value creation through new regenerative medicine technologies ROCK HILL, S.C., Dec. 13, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced two additions to its executive leadership team. Effective today, December 13,... Read More

Repurchasing approximately $135 million of 0% coupon, convertible senior notes at 26% discount to par value Principal balance reduced from $460 million to approximately $325 million, due in 2026 Reinforces balance sheet strength and maintains strong cash position to support operational needs and strategic investments ROCK HILL, S.C., Dec. 06, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (“the Company”) today announced that... Read More

Third-generation material for printing removable dentures offers high break resistance, accurate printing, and repeatable results Material part of company’s portfolio of 30 unique NextDent resins – the largest number available from any dental 3D printing material supplier Company’s additive manufacturing technologies enabling advances in 3D-printed denture market — anticipated to reach more than $2 billion by 2028 ROCK HILL,... Read More

ROCK HILL, S.C., Nov. 07, 2023 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the third quarter ended September 30, 2023. Third Quarter Financial Results and Recent Business Highlights (All numbers are unaudited and are presented in thousands, except per share amounts or as otherwise noted) Q3 2023 revenue of $123,791 decreased from the prior year by 6.4% predominantly driven... Read More

Ground-breaking Accura ® AMX High Temp 300C achieves unprecedented HDT, does not require thermal post-cure SLS 300, including new Powder Recycling Station, makes advanced SLS technology accessible to smaller manufacturing environments DMP Flex 350 Triple offers largest-in-class build area in compact footprint New Application Innovation Group (AIG) Professional Service for C-103 metal material addresses most challenging space... Read More

Hull invented and commercialized the first 3D printing technology, Stereolithography, which gave birth to the 3D printing industry Adoption of additive manufacturing transforming how products are developed, healthcare is delivered Hull and fellow laureates honored at ceremony at The White House on October 24, 2023 ROCK HILL, S.C., Oct. 26, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced Charles (Chuck) Hull,... Read More

Restructuring initiative targeted to deliver incremental annualized savings of $45 - $55 million by the end of 2024 Focus on delivering sustainable profitability while investing in essential growth platforms Preliminary third quarter 2023 revenue expected of $123.0 - $124.0 million Withdrawing full-year 2023 guidance in response to softening outlook for customer capital spending on new production capacity Management to... Read More

Icon selects EXT 1270 Titan Pellet 3D printer with spindle tool head to significantly reduce lead time, cost associated with mold production Icon is first manufacturer in Canada to integrate an EXT 1270 Titan Pellet 3D printer into its production workflow ROCK HILL, S.C., Oct. 23, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems... Read More

Patient-specific cranial implant produced with 3D Systems’ point-of-care additive manufacturing technologies used in pioneering surgery at University Hospital Basel (Switzerland) 3D Systems’ technologies enabled first 3D-printed cranial implant used in surgery at Salzburg University Hospital (Austria) Company’s additive... Read More

MJP 300W jewelry printer raises bar on capability with improved speed, surface finish, and reliability including two new build modes VisiJet ® Wax Jewel Ruby endures high temperatures to maintain fine feature details of intricate patterns, enables presetting of stones for increased efficiency New solution designed to address growing global 3D printed jewelry market — expected to exceed $22 billion by 2030 ROCK HILL, S.C.,... Read More

3D Systems Willing to Amend Current Binding Proposal to Include 60-Day Go-Shop Period to Provide Immediate Value Certainty for Stratasys Shareholders While Also Allowing Stratasys’ Board to Pursue its Strategic Alternatives Process 3D Systems Binding Offer Scheduled to Expire October 5 ROCK HILL, S.C., Sept. 29, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (the “Company”) today issued a statement regarding Stratasys Ltd.’s... Read More

Klarity now offers Klarity Prints™ Powered by 3D Systems, and adds VSP ® Bolus to its comprehensive range of radiotherapy solutions Klarity Prints is easy solution for radiotherapy clinics in United States and Canada to embrace 3D printing technology without investing in costly, time-consuming software ROCK HILL, S.C., Sept.... Read More

Two-year contract award for Large-format Metal 3D Printer Advanced Technology Demonstrator Supports development of large-scale industrial AM print capabilities for Hypersonic Applications Two-year contract will demonstrate key technologies needed for 3D printing large, high-temperature metal structures associated with hypersonic operating environments ROCK HILL, S.C., Sept. 26, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems... Read More

ROCK HILL, S. C., Sept. 21, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced that Michael Turner is stepping down as the company’s Chief Financial Officer, effective October 15, 2023, to accept a new career opportunity. Andrew Johnson, 3D Systems’ executive vice president, chief corporate development officer, and chief legal officer, has been appointed interim CFO, effective October 16. The company has... Read More

Recommendation to Reject the Desktop Metal Merger Based on the Availability of a Superior Alternative to Merge with 3D Systems for Stock and Cash ISS Raises Serious Questions About Stratasys’ Failure to Focus on Shareholder Value ROCK HILL, S.C., Sept. 21, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (the “Company”) issued the following public letter to shareholders of Stratasys Ltd. (NASDAQ: SSYS) (“Stratasys”) after... Read More

Insourcing of metal and polymer production printers in Riom, France & Rock Hill, South Carolina facilities enables enhanced quality control, reduced manufacturing cycle times, and accelerated new product introduction Enhances customer satisfaction through shorter lead times, increased product support, and process customization Enables improved asset management & resource utilization anticipated to reduce total inventories by... Read More

Urges Stratasys Shareholders to Send a Clear Message to the Stratasys Board by VOTING NO on the Value-Destructive Desktop Metal Transaction on September 28 th Delivers Executed Merger Agreement to Present Stratasys Shareholders With a Certain, Value-Creating Alternative to the Desktop Metal Transaction in an Actionable Form ROCK HILL, S.C., Sept. 13, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (the “Company”) today... Read More

Responds to Stratasys’ Requests for Improved Stock Consideration, Enhanced Closing Certainty, Retention of Key Talent and a Role for Stratasys’ CEO in Combined Company Management Proposal Inclusive of Material Cost Synergies Mutually Agreed Upon by 3D Systems and Stratasys in August 22, 2023 Meeting Stratasys Board Rejects Further Discussions Based on Narrow Focus on Current Spot Price of 3D Systems Stock and Moving Ahead... Read More

ROCK HILL, S.C., Sept. 07, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today issued a statement on the company’s ongoing partnership with Align Technology (NASDAQ:ALGN). The statement is in response to significant shareholder inquiries related to Align’s recent announcement that it has entered into a definitive agreement to acquire privately held Cubicure Gmbh. 3D Systems’ 25-year partnership with Align where 3D Systems... Read More

ROCK HILL, S.C. and OMAHA, Neb., Sept. 05, 2023 (GLOBE NEWSWIRE) -- A groundbreaking partnership between 3D Systems of Rock Hill, SC (NYSE:DDD) and Clarkson College will establish the 3D Printing and Training Center of Excellence. This cutting-edge facility, situated on the Clarkson College campus in Omaha, Nebraska,... Read More

ROCK HILL, S.C., Aug. 09, 2023 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2023. Second Quarter Financial Results and Recent Business Highlights (All numbers are unaudited and are presented in thousands, except per share amounts or as otherwise noted) Q2 2023 revenue of $128,194 and year-to-date revenue of $249,430 decreased from the prior... Read More

Theradaptive’s proprietary protein-engineering platform produces targeted therapeutics that can be used to coat implants, devices to achieve hyper-local delivery Theradaptive’s innovative protein-engineering technology, combined with 3D Systems’ unique capability to produce personalized orthopedic implants combines each company’s core strengths to accelerate market introduction 3D Systems named Theradaptive’s exclusive 3D... Read More

ROCK HILL, S.C., July 31, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the second quarter 2023 on Wednesday, August 9, 2023. The company will hold a conference call and simultaneous webcast to discuss these financial results on Wednesday, August 9, 2023 at 8:30 a.m. Eastern Time. Second Quarter 2023 Financial Results Conference Call Date: Wednesday, August 9, 2023... Read More

Confirms Merger Consideration Outlined in Latest Proposal and Binding Merger Agreement is Best and Final Increases Cost Synergy Projection From $100 Million to $110 Million as a Result of Ongoing Diligence Discussions, Delivering Even More Value for Shareholders Targets Parallel Completion of Due Diligence and Merger Agreement Negotiations with Stratasys by August 4 ROCK HILL, S.C., July 27, 2023 (GLOBE NEWSWIRE) -- 3D... Read More

Ground-breaking Accura ® AMX Tough FR V0 Black — first-ever flame-retardant material to address production applications with SLA Figure 4 ® JCAST-GRN 20 enables higher fidelity casting patterns, simplified workflow ROCK HILL, S.C., July 25, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced new materials to... Read More

Matrix Moon first in India to install EXT Titan Pellet 3D printer, pioneering manufacturing transformation Selected 3D Systems EXT 1070 Titan Pellet systems to deliver tremendous cost & time savings for breadth of applications, including sand casting, thermoforming, end parts production ROCK HILL, S.C., July 18, 2023 (GLOBE... Read More

3D Systems’ Signed Merger Agreement Awaits Countersignature by Stratasys Stratasys Decision Reflects Shareholder Feedback That Desktop Metal Merger Does Not Have Support of Stratasys Shareholders Expectation for Swift Termination of Desktop Metal Merger Agreement, Payment of Termination Fee to Desktop Metal by 3D Systems, and Entrance into 3D Systems-Stratasys Merger Agreement If Stratasys Engages Promptly, 3D Systems... Read More

Implied Value per Stratasys Share of $24.07, Based on July 12th Closing Price, Representing a 62% Premium to Stratasys Undisturbed Share Price on May 24, 2023 Implied Value of approximately $28 per Share and approximately $2 Billion in Total Value, Inclusive of $100 Million in Cost Synergies Meaningfully Improves Initial Offer by ~15% and Increases Stratasys Ownership in Combined Company to approximately 44% Delivers... Read More

Collaboration intended to catalyze metal AM applications in high-criticality markets including semiconductor and aerospace Oerlikon acquiring fourth 3D Systems DMP Factory 500 to support efforts ROCK HILL, S.C. and HUNTERSVILLE, N.C., July 11, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) and Oerlikon AM announced the companies have entered a collaboration agreement to further scale metal additive manufacturing.... Read More

ROCK HILL, S.C., June 30, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) (“the Company”) responded to today’s announcement by Stratasys Ltd. (NASDAQ: SSYS) (“Stratasys”) that Stratasys continues to refuse to engage with the Company to discuss a business combination transaction despite the opportunity to create superior value for Stratasys shareholders. On June 27, 2023, the Company submitted an enhanced proposal to combine... Read More

Proposal is More Favorable to Stratasys Shareholders Than the Announced Desktop Metal Combination and Should be Deemed a Superior Proposal by the Stratasys Board Creates Unparalleled Additive Manufacturing Leader with Complementary Leading-Edge Technologies Positioned to Service Nearly Every Vertical in the 3D Printing Market Conference Call to Discuss Enhanced Proposal on Tuesday, June 27 at 8 a.m. EDT ROCK HILL, S.C., June... Read More

Confirming multi-year prior engagement and several proposals sent since January 2021 Proposed combination positioned to deliver at least $100M of cost synergies, previously identified by members of both companies’ management teams ROCK HILL, S.C., June 20, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE: DDD) (“3D Systems,” the “Company”) issued its response to Stratasys Ltd.’s (NASDAQ: SSYS) (“Stratasys”) determination... Read More

ROCK HILL, S.C., June 20, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE: DDD) (“the Company”) today provided an update to its shareholders regarding its proposal to combine with Stratasys Ltd. (NASDAQ: SSYS) (“Stratasys”) in a cash and stock merger that would convert each Stratasys share into $7.50 in cash and 1.2507 newly issued shares of 3D Systems common stock 1 . The combination would result in Stratasys shareholders owning... Read More

SWANY opening new demo center with 3D Systems’ EXT 1070 Titan Pellet printer (formerly Titan Atlas 2.5 HS) to showcase high-throughput production capabilities Companies will jointly develop print parameters for additional materials in effort to realize sustainable manufacturing ROCK HILL, S.C. and INA CITY, Japan, June 19,... Read More

Combination Creates Clear Pure-Play Additive Manufacturing Leader with Unmatched Scale and Highly Attractive Financial Profile in Rapidly Scaling Industry Significant Shareholder Value Creation Fueled by $100 Million of Cost Synergies Inclusive of Cost Synergies, Proposal Provides Value of Approximately $25 per Stratasys Share, a 70% Uplift for Stratasys Shareholders Proposal Delivers Certain and Immediate Value and... Read More

High-speed, large capacity SLA 750 enables The Technology House to help customers expand additive manufacturing applications in industrial & healthcare industries SLA 750 is world’s fastest Stereolithography printer, helping The Technology House deliver for its customers 50% faster than with previous platform ROCK HILL, S.C.,... Read More

ROCK HILL, S.C., May 08, 2023 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the first quarter ended March 31, 2023. First Quarter Financial Results and Recent Business Highlights (All numbers are unaudited and are presented in thousands, except per share amounts or as otherwise noted) Q1 2023 revenue of $121,236 decreased 8.8% compared to Q1 2022 a decrease of 6.5% on a... Read More

ROCK HILL, S.C., May 08, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced the next phase of its multi-faceted restructuring initiative to improve operating efficiencies throughout the organization and drive long-term value creation. This next evolution of restructuring will reduce headcount by approximately 6%, with the majority of reductions being made in Corporate and Business support functions which are... Read More

New SLS Material Delivery Module facilitates use of multiple materials on 3D Systems’ Selective Laser Sintering platform for improved efficiency, utilization Introduction of DMP Build Changeover Station delivers cost-effective, flexible printer turnarounds on large-format DMP Factory 500 Addition of GRCop-42, CuCr1Zr to... Read More

Affordable, turnkey, closed-loop solutions make Selective Laser Sintering (SLS) accessible for smaller manufacturing environments More than 20 materials to address range of applications for industrial, medical devices & equipment, academic markets Sets new standards for customer ease of installation, ease of use, environmental... Read More

DMP Flex 350’s large print volume, vacuum chamber enable MolyWorks to be more agile and efficient than with previous metal 3D printer In-house production capability helped MolyWorks expand business including new engagement with United States Air Force ROCK HILL, S.C., May 01, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems... Read More

Several hundred dental labs have adopted Oqton’s Manufacturing Operating System worldwide in first 18 months of availability Production efficiency gains exceed 50% in first year of implementation Customer renewal extremely strong with churn rates of negative 20-30% Ratio of lifetime-value to customer-acquisition-cost of over five demonstrates value creation through Oqton adoption Oqton embedded AI proven effective with broad... Read More

ROCK HILL, S.C., April 21, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced the successful verification of properties for NASA's groundbreaking new laser powder bed fusion super alloy, GRX-810. This revolutionary oxide dispersion-strengthened alloy, developed by the National Aeronautics and Space Administration (NASA), demonstrates exceptional mechanical properties and resistance to extreme temperatures,... Read More

55-year-old male suffering from skull deformity receives 3D-printed PEEK cranial implant successfully manufactured at point of care Hospital’s in-house clinicians combined unique capabilities of Oqton’s D2P ® and Geomagic Freeform ® software with 3D Systems’ Kumovis R1 to produce patient-specific cranial implant Application of... Read More

ROCK HILL, S.C., April 11, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the first quarter 2023 after the U.S. stock markets close on Monday, May 8, 2023. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, May 9, 2023 at 8:30 a.m. Eastern Time. First Quarter 2023 Financial Results Conference Call Date:... Read More

15,000 sq. ft. facility in TMC Innovation Factory Labs will house Systemic Bio’s R&D, production of patent-pending h-VIOS ™ organ-on-a-chip platform Cleanroom manufacturing intended to support sterile production of thousands of h-VIOS chips, plates — an unprecedented capacity to support multiple contracts with pharmaceutical companies over next 12 months Jeremy Carter, seasoned biopharmaceutical production leader, joins as... Read More

Novel workflow enables production of end-use parts in weeks versus months without tooling investment Unique photopolymer introduced with full UL recognition capable of meeting stringent connector application needs First known 3D photopolymer to complete long-term thermal aging for electrical and mechanical relative thermal... Read More

Two materials — NextDent ® Base, NextDent Cast — engineered to deliver improved mechanical properties Addition of NextDent LCD1 small format, easy-to-use printer opens opportunities for clinicians to bring 3D printing into office for improved efficiency, enhanced patient experience ROCK HILL, S.C., March 13, 2023 (GLOBE... Read More

Intend to combine Oqton’s Manufacturing OS with Baker Hughes’ proprietary applications to accelerate innovation in energy sector Companies expect to market enhanced tools to address applications in additional industries Software platform will be offered under Oqton brand, providing full factory-floor workflow integration, automation, control, and optimization from part design through final inspection GHENT, Belgium, March... Read More

Automated workflows powered by Enhatch drive efficiencies to deliver patient-specific devices, instrumentation at scale Portal improves visibility facilitating better communication, traceability, compliance ROCK HILL, S.C., March 06, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced VSP ® Connect , a centralized,... Read More

ROCK HILL, S.C., Feb. 28, 2023 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the fourth quarter and full year ended December 31, 2022. Fourth Quarter Financial Results and Recent Business Highlights (All numbers are unaudited and are presented in thousands, except per share amounts or otherwise noted) Q4 2022 revenue of $132,732 decreased 12.0% compared to Q4 2021; Non-GAAP... Read More

ROCK HILL, S.C., Feb. 28, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced a multi-faceted restructuring initiative designed to improve operating efficiencies that include optimizing its European metal printer operations and streamlining its software organization. The initiative is expected to reduce operating expenses in 2023 by approximately $2.5 million to $3.5 million, and provide an annualized savings of... Read More

BWT Alpine F1 Team realizing unparalleled productivity and part quality with SLA 750 Solution Team producing models for wind tunnel testing with 3D Systems’ Accura ® Composite PIV material to reduce preparation time, improve performance 3D Systems’ additive manufacturing solutions enabling BWT Alpine F1 Team to produce 25,000... Read More

Launching bioprinted human tissue platform for non-organ applications leveraging expertise gained in solid organ development Initial focus on development, commercialization of soft tissue applications enabling disruptive autologous reconstruction solutions, utilizing company’s VSP ® surgical planning solutions and experience in patient-specific medical implants First product under development targets patient-specific... Read More

Next-generation product platform strengthens company’s additive manufacturing leadership in the $25 billion global jewelry manufacturing market Up to 2x improvement in 3D printed casting patterns’ vertical resolution reduces need for polishing and precious metal waste, expands breadth of designs Up to 25% higher throughput of... Read More

ROCK HILL, S.C., Feb. 08, 2023 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced the appointment of Dr. Rebekah Gee to the 3D Systems Medical Advisory Board, effective March 1, 2023. Dr. Gee is a recognized expert on public health policy and was elected to the National Academy of Medicine in 2017. Dr. Gee will join six other members of the advisory board who have been named since the board’s establishment in May... Read More

ROCK HILL, S.C., Jan. 31, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) announced today it will release its financial results for the fourth quarter and full year 2022 after the U.S. stock markets close on Tuesday, February 28, 2023. The company will hold a conference call and simultaneous webcast to discuss these financial results on Wednesday, March 1, 2023 at 8:30 a.m. Eastern Time. Fourth Quarter and Full Year 2022... Read More

Three-year technical partnership intended to catalyze Stewart-Haas Racing’s engineering prowess for competitive advantage 3D Systems’ solutions enable rapid design, testing, and production of critical components to increase speed, improve performance ROCK HILL, S.C. and KANNAPOLIS, N.C., Jan. 25, 2023 (GLOBE NEWSWIRE) -- 3D... Read More

One of the largest US-based medical device manufacturers adds DMP Flex 350 Dual to its fleet of more than 30 3D Systems printers New 3D printer increasing productivity for rms’ powder to package capability, intended to open new applications for additive manufacturing ROCK HILL, S.C., Jan. 19, 2023 (GLOBE NEWSWIRE) -- Today, 3D... Read More

ROCK HILL, S.C., Jan. 05, 2023 (GLOBE NEWSWIRE) -- 3D Systems (NYSE:DDD) today announced the appointment of Mr. Bert Bruce to the company’s Medical Advisory Board. Mr. Bruce will join the five other members of the advisory board who have been named since the Board’s establishment in May 2022: Dr. Stephen K. Klasko, former President and CEO of Thomas Jefferson University and Jefferson Health; The Honorable David J. Shulkin,... Read More

ROCK HILL, S.C., Dec. 07, 2022 (GLOBE NEWSWIRE) -- Today, 3D Systems (NYSE:DDD) announced that Dr. Joe Zuiker will join the company as Executive Vice President, Engineering and Operations, effective December 12, 2022. In addition, industry veteran Dr. Brent Stucker, who joined 3D Systems in 2021, is appointed Chief Technology Officer – Additive Manufacturing. Both positions will report directly to Dr. Jeffrey Graves,... Read More

Small footprint, affordable, turnkey Selective Laser Sintering (SLS) solution makes additive manufacturing accessible for industrial, durable medical equipment, academic applications 3D Systems to expand availability of Wematter Gravity SLS solution as exclusive worldwide distributor ROCK HILL, S.C., Nov. 14, 2022 (GLOBE... Read More

Certified HX ideal for challenging hot-zone applications including energy, industrial gas turbine due to strength and corrosion-resistance Certified CuCr2.4 alloy significantly stronger than pure copper for heat management and cooling applications for high-tech, consumer goods ROCK HILL, S.C., Nov. 14, 2022 (GLOBE NEWSWIRE) --... Read More

ALM to add 3D Systems’ DuraForm ® PAx to its portfolio — expanding access to a first-to-market copolymer with unparalleled properties DuraForm PAx is a lower-cost, highly recyclable nylon copolymer engineered for parts that sustain high impact, high elongation for a variety of industrial applications ROCK HILL, S.C. and... Read More

ROCK HILL, S.C., Nov. 08, 2022 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the third quarter ended September 30, 2022. Third Quarter Highlights Revenue of $132.3 million decreased (15.3)% compared to Q3 2021; Q3 non-GAAP revenue excluding divestitures and on a constant currency basis (1) increased 2.7%, reflecting solid demand in both the Industrial and Healthcare segments,... Read More

3D Systems (NYSE:DDD) announced today it will release its financial results for the third quarter 2022 after the U.S. stock markets close on Tuesday, November 8, 2022. The company will hold a conference call and simultaneous webcast to discuss these financial results on Wednesday, November 9, 2022, at 8:30 a.m. Eastern Time. Third Quarter 2022 Financial Results Conference Call Date: Wednesday, November 9, 2022 Time: 8:30... Read More

Company using 3D Systems’ DMP Flex 350 Dual for production of high-reliability Titanium parts for medical device and industrial applications DMP Flex 350 Dual enabling productivity improvements of at least 50% and lowered cost as compared to single-laser solution Today, 3D Systems (NYSE:DDD) announced that Amnovis , an... Read More

3D Systems (NYSE:DDD) announced today that management will participate in a panel during William Blair’s “What’s Next for Industrials” Conference. The panel, titled “Advancing Healthcare Through 3D Bioprinting,” will take place virtually on Friday, September 23, 2022, at 12:00 p.m. Eastern Time. A recording of the panel will be available on the "Events and Presentations" section of 3D Systems’ website at... Read More

Today, 3D Systems (NYSE:DDD) announced that Andrew Johnson, the company’s executive vice president, chief legal officer, is taking on expanded responsibilities as chief corporate development officer. In this role, he will not only lead the company’s mergers and acquisitions but will also lead the establishment of new strategic partnerships in support of the company’s expanding business needs. Mr. Johnson has been with 3D... Read More

Figure 4 ® Tough Clear – first production-grade, clear material in Figure 4 portfolio - opens new industrial applications requiring long-term use parts Company builds on open materials strategy for selective laser sintering with DuraForm ® PAx Black - lower cost, highly recyclable nylon copolymer for industrial applications Today, 3D Systems (NYSE:DDD) announced Figure 4 ® Tough Clear and DuraForm ® PAx Black – two new... Read More

New company will leverage 3D Systems’ recent breakthroughs in bioprinting of vascularized human organs and tissues to accelerate new drug development, reduce costs, and ultimately reduce or eliminate the need for animal testing Unique bioprinted organ-on-a-chip platform, h-VIOS™, created using hydrogels to produce complex... Read More

3D Systems & HII co-developed CuNi30 to enable production of traditionally cast parts, potentially reducing lead time by up to 75% Direct metal printing of copper-nickel (CuNi30) results in average relative density of 99.88% - a significant improvement compared to casting Material to be commercially available to address... Read More

3D Systems (NYSE:DDD) today announced the appointment of Dr. Toby Cosgrove, former president & chief executive officer of the Cleveland Clinic, and Dr. Bon Ku, director of the Health Design Lab at Thomas Jefferson University, as the fourth and fifth members of the company’s recently established Medical Advisory Board (MAB). Dr. Cosgrove and Dr. Ku will join former Health & Human Services Secretary Alex Azar, Dr. Stephen K.... Read More

3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter ended June 30, 2022. Second Quarter Financial and Operational Results Q2 2022 revenue of $140.0 million declined 13.8% compared to Q2 2021; Q2 non-GAAP revenue excluding divestitures and on a constant currency basis (1) increased 7.8%, reflecting solid demand in both the Industrial and Healthcare segments despite supply chain and... Read More

3D Systems (NYSE:DDD) today announced the appointment of Alex M. Azar II, former United States Secretary of Health and Human Services, as the third member of the company’s recently established Medical Advisory Board (MAB). Secretary Azar will join Dr. Stephen Klasko, former President and CEO of Thomas Jefferson University and... Read More

dp polar’s unique, industrial-scale rotating build platform enables continuous, high-speed 3D printing of components across multiple processes for industrial & healthcare production applications Integration with 3D Systems’ broad portfolio of polymer materials and production-focused software systems will enable rapid adoption of dp polar technology into a wide range of high-speed, automated production environments Today, 3D... Read More

3D Systems (NYSE:DDD) announced today that Michael Turner will join the company as Executive Vice President and Chief Financial Officer, effective August 29, 2022. He will report to President and CEO, Dr. Jeffrey Graves, and will lead the company’s global finance organization, including accounting and controllership, financial... Read More

3D Systems’ Application Innovation Group assisted with process development, bridge production, technology transfer of additively manufactured radio frequency (RF) patch antennas for small satellite applications Delivery of DMP Flex 350 enables Fleet Space Technologies to bring antenna production in-house for 140 Alpha... Read More

3D Systems (NYSE:DDD) announced today it will release its financial results for the second quarter 2022 after the U.S. stock markets close on Monday, August 8, 2022. The company will hold a conference call and simultaneous webcast to discuss these financial results on Tuesday, August 9, 2022, at 8:30 a.m. Eastern Time. Second Quarter 2022 Financial Results Conference Call Date: Tuesday, August 9, 2022 Time: 8:30 a.m. Eastern... Read More

Leveraged combined expertise to introduce DuraForm ® PAx Natural – a first-to-market material available for all Selective Laser Sintering platforms Lower cost, highly recyclable nylon copolymer engineered for parts that sustain high impact, high elongation for a variety of industrial applications Low operating temperature reduces time to part in hand compared to other available nylon materials and increases printer uptime... Read More

3D Systems (NYSE:DDD) today announced the appointment of David J. Shulkin, MD, former United States Secretary of Veterans Affairs, to the company’s recently established Medical Advisory Board (MAB). The primary mission of the MAB is to provide strategic input, guidance, and recommendations for the company’s expanding efforts in regenerative medicine. As one of the country’s most highly respected experts in health care... Read More

United Therapeutics Corporation (Nasdaq: UTHR ), a public benefit corporation, announced today that in partnership with 3D Systems Corporation (NYSE: DDD ) it has produced the world’s most complex 3D-printed object – a human lung scaffold – and demonstrated it at the LIFE ITSELF Conference that occurred May 31 to June 3, 2022 in San Diego. The event was organized and hosted by Dr. Sanjay Gupta and Marc Hodosh and was... Read More